Premium grade hamilton jets and mercury sport jet performance packages
Expert Jet boat repair and fabrication

"The Full House" : This consists of full porting and polishing of bowl area, stator section, transition pipe and nozzle as well as port matching of stator transition pipe. Port floors are lowered and radiuses are increased to promote higher flow rates. All pieces are thoroughly cleaned and inspected, then internally coated first with a zinc primer, then our exclusive water repelling coating to keep them smooth, eliminate drag and protect them from corrosion. The nozzle housing is then drilled, chamfered and tapped in the pin area for grease fittings. Used pumps are then fitted with a new wear ring in the barrel. Now our attention is turned to the impeller. The impeller is first welded on the outside of the blades to build up the circumference, then precision machined to our specs. After machining the blades are shaped and the internal cone is profiled. Then the entire assembly is smoothed and polished to a satin finish. The impeller is then dynamically balanced to within +/- 2 grams. The barrel assembly is then fully reassembled and ready for installation. We provide shims and instructions for shimming the impeller when you reassemble the unit on your boat.

212/213 Hamilton / NEW PUMP $1350.00 / USED PUMP $1550.00
                *USED PUMPS RECEIVE NEW WEAR RING

         OPTIONS: "THE ALL IN" IMPELLER - Consists of additional machining to reduce the reciprocating weight by a whopping 750 grams            ADD: $200.00

         SABRE TIPS: OUR stainless stator caps for maximum protection and performance $900.00
 
   SPORT JET: OUR "FULL HOUSE" for your MERCURY SPORT JET $750.00 new parts only!

     OTHER SERVICES: WELD IMPELLER, MACHINE TO BLUEPRINT CLEARANCE AND TUNE-UP BLADES:  $300.00

    MODIFY INTAKE GRATE TO MAXIMIZE EFFICIENCY: 212 Hamilton: $200.00
                                                                                    213 Hamilton: $250.00
MERCURY SPORT JET BORE BARREL AND ADD LINER: $600.00

WELD AND MACHINE IMPELLER: $225.00

SPORT JET (SABRE TEETH) STATOR REBUILD: $1100.00
    
   DRILL, CHAMFER, TAP AND INSTALL GREASE FITTINGS IN NOZZLE JOINTS: $75.00

   DYNAMICALLY BALANCE IMPELLER: $100.00

   REPAIR DAMAGED STATORS AND ALL OTHER PUMP WORK: $75.00/hr

SABRE TIPS SPORT JET : $700.00

   WE WILL SOON BE ADDING MORE PRODUCTS AND SERVICES!
 
TURNAROUND TIME DEPENDS ON DEMAND - FIRST COME- FIRST SERVED!

                 ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

 
MAVERICK WATERSPORTS  1142 16th ave. suite E
                                          CLARKSTON, WASHINGTON 99403
                                          (208) 791-9155
                                          WWW.MAVERICKWATERSPORTS.COM

Website Builder